This TA Tech Tip introduces the new arbitrary wave capabilities available on the Discovery™ ARES‑G3™ Rheometer. The exciting improvements extend temperature capabilities, simplify test setup, and improve data quality for evolving systems.
This TA Tech Tip walks users through loading polymer pellets on the Discovery™ ARES-G3™ Rheometer using a disposable melt ring. It also highlights how the updated keypad and touchscreen work together to streamline setup and make everyday workflows faster and easier.
Overview In this Tech Tip, we discuss the parallel plate geometry on the TA Instruments HRx Rheometer and show you how to set up and run this experiment on a soft solid. HRx Overview: https://www.tainstruments.com/an-overview-of-the-discovery-hrx-rheometers/ How to Avoid Slippage: https://www.tainstruments.com/how-to-avoid-slippage-during-rheological-testing/ Geometry Calibrations: https://www.tainstruments.com/plate-or-cone-geometry-calibrations-dhr/
Overview Check out our video on low viscosity samples: https://www.tainstruments.com/how-to-load-low-viscosity-liquid-samples-on-a-rotational-rheometer-2/. In this Tech Tip, we cover an instrument overview of our Hybrid Rheometers, also referred to as our HRx series. For more helpful tips, subscribe and check out our website at https://www.tainstruments.com.
Overview In this Tech Tip, we’ll be discussing how to use RheoGuide software™ to run experiments on the Discovery Core Rheometer.
Overview In this Tech Tip, we’ll be discussing how to create RheoGuide™ methods using TRIOS software for the Discovery Core Rheometer.
Overview In this Tech Tip, we will install and calibrate the TA Instruments Rheo-Impedance Spectroscopy Accessory for HR Rheometers.
Overview In this Tech Tip, we will show you how to set up a Compressibility Test using the Powder Rheology accessory on the DHR.
Overview In this Tech Tip, we will show you how to set up the Powder Flow Cell with temperature control on the DHR.
Overview In this Tech Tip, we will show you how to setup up the powder shear cell with temperature control on the DHR.
Overview In this Tech Tip, we will show you how to set up the Auto-Trim Accessory for the Discovery Hybrid Rheometer.
Overview In this Tech Tip, we will set up the TA Instruments powder rheology flow cell.