Tech Tips

View all Dilatometry ElectroForce Flash Diffusivity General Microcalorimetry Rheology Rubber Software Thermal Applications Thermal Conductivity

Setting Up a Concentric Cylinder Geometry on the Discovery Hybrid Rheometer

Setting up the Ball on Three Plates Geometry on the Discovery HR for Tribo-Rheometry Testing

Setting up the Ring on Plate Geometry on the Discovery HR for Tribo-Rheometry Testing

How to Access the Help Menu on the DMA 850

Navigating the Help Resources Available for Our Rheology Instruments

How to Set Up a Conductivity Experiment on a Xenon or Laser Flash Instrument

Discussing the Linear Viscoelastic Region and Selecting a Strain Value

Calibrating Reversing Heat Capacity with MDSC

Switching Probes on the Discovery TMA 450 RH

Measuring Heat Capacity Using the ASTM Three-Run Method – Discovery DSC

How to View Raw Data for ElectroForce DMA Results

Setting Up the Saturator Reservoir for the Discovery SA

How to Run a PCA Experiment on the Discovery DSC

Installing the Photocalorimeter Accessory (PCA) for the Discovery DSC

How to Manage Large WinTest Files in Trios

Overview of the Kinetics Package for TRIOS Software

How to Avoid Slippage During Rheological Testing

Set Up & Use of the Annular Ring Geometry for the Discovery DHR-RH Accessory

Glass Transition Temperature Ramp Analysis on the Discovery DMA 850

Cantilever Clamp Installation on the ARES-G2

Data Acquisition Types Available in WinTest Software

Expansion & Penetration Probe Installation – Discovery TMA 450 Thermomechanical Analyzer

Installation of the Film/Fiber Probe on the Discovery TMA 450

How to Load Low Viscosity Liquid Samples on a Rotational Rheometer

Cell Constant & Temperature Calibrations for the Discovery X3 DSC

An Introduction to Batch Processing in TRIOS

Setting Up Experiments for the New Discovery X3 DSC

Setting Up a DMA Compression Test on the ARES-G2 Rheometer

TRIOS Features for Plotting and Analysis of Fatigue Test Data

TRIOS Integration for Data Acquisition and Overlay from Samples Undergoing Failure

Installing the Cleaning Station for Use on the Affinity ITC & Nano DSC

Setting Up a DMA Compression Test on the Discovery HR Rheometer

How to Load Low Viscosity Liquid Samples on a Rotational Rheometer

Introducing the DSC Sample Cutting Kit

Cycle Indirect Block Waveform in WinTest Software

Acceleration Compensation in WinTest Software

DMA Test Setup on ElectroForce Test Systems

Using the Extensional Viscosity Accessory (EVA) on the DHR

Loading Polymer Pellets for Melt Rheology on the Discovery Hybrid Rheometer

Geometry Selection for Testing Solid Samples on a Rheometer