Vorbereitung einer Probe in TGA Smart-Seal-Pan für Discovery TGA
Überblick In diesem TechTipp zeigen wir, wie eine atmosphärenempfindliche Probe für die thermogravimetrische Analyse in einer TGA Smart-Seal-Pan vorbereitet wird.
Bestimmung der Wärmekapazität mittels Discovery DSC: Die klassischer Methode mit drei Experimenten
Overview In this Tech Tip, we will discuss measuring heat capacity using DSC with the ASTM 3-run method.
How to Run an LED-PCA Experiment on the Discovery DSC
Overview TA Instruments – Waters Corporation’s state-of-the-art LED Photocalorimeter Accessory (LED-PCA) allows for the comprehensive study and characterization of photocurable materials across a broad temperature spectrum.
Installing the LED Photocalorimeter Accessory for the Discovery DSC
Overview In this Tech Tip, we will install the new Photocalorimeter Accessory (LED-PCA) on the Discovery DSC.
Adding Calibration Standards to TRIOS Software
Overview In this Tech Tip, we will show you how to add a calibration standard to TRIOS software. Calibrations are obtained by comparing the literature values of known standards to the measured ones in the calibration experiment. Standards’ melting, curie, Cp, and CTE values are used for different calibrations on thermal instruments. Here we will…
Preparing an Indium Sample for Cell Constant & Temperature Calibration
Overview In this Tech Tip, we will set up cell constant and temperature calibration on the Discovery DSC and prepare an indium sample for the calibration.
Auswahl von Messparametern für Modulierte DSC (MDSC) Experimente
Overview In this Tech Tip, we will give a general overview of the parameters you need to select when running a modulated differential scanning calorimetry experiment, also known as MDSC.
DHR Solid Polymer Torsional Analysis – TRIOS Polymer Guided Methods
Overview In this Tech Tip, we introduce the new DHR Polymer Torsional TRIOS Guided Method.
DHR Polymer Melt Analysis – TRIOS Polymer Guided Methods
Overview In this Tech Tip, we introduce the new DHR Polymer Melt TRIOS Guided Method.
TGA Decomp and Residue – TRIOS Polymer Guided Methods
Overview In this Tech Tip, we introduce the new TGA Decomp and Residue TRIOS Guided Method.
DSC Initial Crystallinity – TRIOS Polymer Guided Methods
Overview In this Tech Tip, we introduce the new DSC Initial Crystallinity TRIOS Guided Method.
DSC Percent Cure – TRIOS Polymer Guided Methods
Overview In this Tech Tip, we introduce the new DSC Percent Cure TRIOS Guided Method.