多試樣疲勞

為了以更低成本更快繪製NiTi、CoCr以及SS支架材料和結構的疲勞壽命(s/n)曲線,TA ElectroForce利用ElectroForce® 3200和3330測試儀器的通用性設定了多試樣測試系統。這兩種系統均擁有TA ElectroForce高精度位移感應器的增強測量功能。通過改進低振幅位移測量,這可擴大測試範圍,所有這一切都是通過易於使用的單個位移通道實現的。感應器經校準後可達到最高精度等級,即ASTM E-2309 A類標準

細節

DLF 1200

The Discovery Laser Flash DLF 1200 employs a custom Class 1 Nd:Glass Laser pulse source to provide a collimated, monochromatic energy pulse with a 300 μs to 400 μs pulse width. Ideal for labs that need to measure thermal diffusivity, heat capacity or thermal conductivity at temperatures up to 1200°C, or require the power of a laser in a compact benchtop instrument.

Equipped with a liquid nitrogen-cooled IR detector, DLF 1200 provides high precision, quick response, non-contact measurements in air, inert gas or vacuum to 10-3 torr. Simple to operate and safe to use, easy to maintain and very economical to operate, these systems are suitable for research and development programs, as well as quality control.

細節

DXF 900

The Discovery Xenon Flash (DXF) source module employs a High Speed Xenon-pulse Delivery source (HSXD) which has considerably higher efficiency, lower costs and less maintenance than equivalent systems. A reflective optic configuration of our design effectively harnesses the power of a Xenon flash tube and, with the aid of proprietary wave guides, delivers it to the specimen inside the Environmental Module. DXF 900 produces a pulse width of 400 μs to 600 μs and uniformly concentrates the power from the flash source directly on the entire face of the specimen. Due to this optimized optical arrangement and the broad light spectrum, specimens as large as 25 mm in diameter can be illuminated with sufficient energy to make a high-accuracy measurement. The use of large samples diminishes errors associated with inhomogeneity and permits representative measurements of poorly dispersed composites.

細節

DXF 500

The Discovery Xenon Flash (DXF) source module employs a High Speed Xenon-pulse Delivery source (HSXD) which has considerably higher efficiency, lower costs and less maintenance than equivalent systems. A reflective optic configuration of our design effectively harnesses the power of a Xenon flash tube and, with the aid of proprietary wave guides, delivers it to the specimen inside the Environmental Module. DXF 500 produces a pulse width of 400 μs to 600 μs and uniformly concentrates the power from the flash source directly on the entire face of the specimen. Due to this optimized optical arrangement and the broad light spectrum, specimens as large as 25 mm in diameter can be illuminated with sufficient energy to make a high-accuracy measurement. The use of large samples diminishes errors associated with inhomogeneity and permits representative measurements of poorly dispersed composites.

細節

DXF 200+

The Discovery Xenon Flash DXF 200 employs a High Speed Xenon-pulse Delivery source (HSXD) with considerably lower cost and less maintenance than a laser and generates equivalent results. A reflective optic configuration of our design effectively harnesses the power of a Xenon flash tube and, with the aid of proprietary wave guides, delivers it to the specimen inside the Environmental Module. DXF 200 produces a pulse width that is shorter (400 μs to 600 μs) than many commercial laser-based systems, while uniformly concentrating sufficient power from the flash source directly on the entire face of the specimen. Due to this optimized optical arrangement and the broad light spectrum, specimens as large as 25 mm in diameter can be illuminated with sufficient energy to make a high-accuracy measurement. The use of large samples diminishes errors associated with inhomogeneity and permits representative measurements of poorly dispersed composites.

細節

MV one

MV one Mooney黏度儀結合了最新測量技術,可用於測量橡膠工業中的傳統Mooney黏度、Mooney焦燒和應力弛豫。MV one是一種功能齊全的儀器,其經過設定,可以2 rpm的恒定轉速在等溫測試條件下對橡膠複合物進行標準黏度,焦燒和應力弛豫(線性、對數、ISO、Mooney應力弛豫率)測試。可選的連續可變電機模式允許在0.1至10 rpm的速度範圍內進行測試。MV one Mooney黏度儀配備符合所有相關ASTM、ISO和DIN標準的低品質轉子。所有TA Instruments橡膠測試儀器均採用超剛性測試架結構,包括直驅電機、精密溫度控制,以及強大且直觀的Scarabaeus控制和分析軟體。

細節

MDR One

MDR one動模流變儀(MDR)是一款可靠、精確、易於操作的無轉子硫化儀,非常適合執行橡膠固化的常規以及標準驅動的測試。MDR one經過設定,可用於以恒定應變和頻率在等溫和非等溫測試條件下測量橡膠複合物的固化曲線。MDR one採用符合所有相關ASTM、ISO和DIN標準的密封式雙錐形模具。獨特的設計包括超高剛性測試架、直驅電機、具有選配冷卻裝置的精確溫度控制、可用的自動進樣器,以及直觀的Scarabaeus控制和分析軟體,這使其成為品質控制或研發環境的理想平台。

細節