Performing Isothermal Cell Constant & Multi-Cell Constant Calibrations on the Coin Cell DSC

Performing Isothermal Cell Constant & Multi-Cell Constant Calibrations on the Coin Cell DSC

Consejos técnicos, Thermal Applications, Videos

In this Tech Tip, learn how to perform multi cell constant and isothermal cell constant calibrations for the Discovery Coincell DSC to ensure accurate thermal measurements and charge cycling analysis. The video walks through calibration setup in TRIOS software, explains the principles behind isothermal calibration, and demonstrates the hardware and procedures required to generate and apply cell constants.

Setting Up and Running a Parallel Plate Test on the Discovery HRx Rheometer

Setting Up and Running a Parallel Plate Test on the Discovery HRx Rheometer

Consejos técnicos, Reología

Overview In this Tech Tip, we discuss the parallel plate geometry on the TA Instruments HRx Rheometer and show you how to set up and run this experiment on a soft solid. HRx Overview: https://www.tainstruments.com/an-overview-of-the-discovery-hrx-rheometers/ How to Avoid Slippage: https://www.tainstruments.com/how-to-avoid-slippage-during-rheological-testing/ Geometry Calibrations: https://www.tainstruments.com/plate-or-cone-geometry-calibrations-dhr/