Overview

TA Instruments is bringing our in-house experts to you! Join us for our new online seminar series for a unique opportunity to learn and discuss the latest analytical insights with our applications and product management team. A question and answer session with the speaker will follow each seminar.

Seminars

Adhesive, Epoxy

Thermal, Rheological and Mechanical Characterizations of Thermosets

Tianhong (Terri) Chen, Ph.D.

Thermosetting materials, such as epoxy, have been widely applied in many areas including automotive, aerospace and electronics industries in the form of surface coating, structural adhesives, advanced composites and packaging materials.

View Archive

Pharmaceutical Drugs

Advancements in the Characterization of Pharmaceuticals by DSC

Jason Saienga, Ph.D.

Differential Scanning Calorimetry is a simple, yet powerful technique to gain a broad understanding of the characteristics of pharmaceutical materials, from the crystalline structure that exists to the compatibility of a specific formulation.

View Archive

Polymers

Steady State & Flash Methods for Thermal Diffusivity and Thermal Conductivity Determination

Justin Wynn

In this presentation we will demonstrate accurate and high-throughput methods to measure the critical heat transfer properties of thermal diffusivity and thermal conductivity.

View Archive

Oil Drums

Use of Thermal Analysis and Rheometry to Study Waxation in Crude Oil

Yash Adhia

Crude oil is typically extracted as a single organic liquid phase from the reservoir. However during transportation, a drop in the temperature can cause the higher molecular weight paraffins or waxes to separate into the solid phase.

View Archive

Batteries

Unlock a New Dimension in your Battery Research Through Isothermal Microcalorimetry

Malin Suurkuusk, Ph.D.

In order to meet growing market demands for power storage, Lithium ion and new battery chemistries demand higher energy density, longer cycle life, calendar life, and better safety to a lower cost. Isothermal microcalorimetry is a highly sensitive, non-destructive and non-specific tool to characterize these critical performance criteria.

View Archive

Thermogravimetric Analysis under Extreme Conditions

Thomas Paschke, Ph.D.

In this webinar, we will examine the use of the new TGA technologies with an extended working range. Examples of the analysis of technically relevant materials such as polymers, metals, coal and biomass, catalysts and zeolites show the added value of application-relevant material characterization for the development of materials and processes.

View Archive

Chemical Characterization of Medical Devices

Baiba Cabovska, Ph.D.

During the formulation and manufacturing of polymeric materials for medical devices, the materials go through multiple stages and undergo many transformations. At each of these stages new additives might be added or the material is exposed to physical factors like heat which impacts the chemical nature of the ingredients.

View Archive

Mechanics and Strength of Biomaterials

Muhammad Haris

This presentation will introduce a range of biomaterials test applications where mechanical test instruments are assisting researchers and engineers in gaining a better understanding of native and artificial tissues.

View Archive

Fatigue and Durability of Medical Devices

Sadegh Behdad, Ph.D.

Durability testing of Medical Devices is crucial for validation of performance and safety and often becomes an important element of regulatory submissions. A variety of common standards-based test methods will be presented including example or published test data for each.

View Archive

Rheology of Soft Biomaterials

Greg Kamykowski, Ph.D.

We will discuss the 2 main approaches to rheological testing – unidirectional testing, such as flow testing on fluids and transient tests on solid-like materials, as well as dynamic oscillatory testing. We will also describe some accessories that pertain to testing of biomaterials.

View Archive

Characterizing Polymer Properties for Compound Formulation: Determining Polymers That Lead to Successful Products

Sarah Cotts

The polymer used in a compound recipe is critical to compound processing behavior and final product performance, yet polymer characterization is an under-utilized technique in the rubber industry. Variations in the composition, average molecular weight, molecular weight distribution or branching of the polymer lead to significant differences in processing behavior and often result in processing defects and scrap. This webinar will introduce methods to characterize raw polymers that lead to reduced compound variability and improved product performance.

View Archive

Techniques for Rubber Compound Processing and Production Success

Alina Latshaw, Ph.D.

Have you experienced manufacturing performance differences between batches of materials, despite seeing no difference in specifications or cure data? Do you want to reduce scrap, improve processing efficiencies, and minimize variability in your manufacturing process?

Join us as we adventure beyond the cure curve and look at additional testing methods to correlate material characteristics of rubber compounds with processing behavior and production success.

View Archive

Correlating Cured Rubber Characteristics to Product Performance

Sadegh Behdad, Ph.D.

New product design is expedited by gathering product performance metrics early in the compound development process. These key metrics link to final product performance and answer common questions: How will my product perform in its final application? Is performance guaranteed over the lifetime of the product? Predicting mechanical rigidity, suitability to end-use environmental conditions, and long-term stability empower a compound developer to filter for leading candidates before progressing to expensive pilot and larger scale trials.

In this talk, we will introduce several techniques to characterize cured rubber products and link these measurements to final product performance, ensuring customer acceptance and success.

View Archive

Achieving 21CRF11 Compliance for Thermal Analysis and Rheology Data Management Through TRIOS Guardian

Jeff Lundstrom

In this webinar, you will learn how Guardian for TRIOS leverages existing Windows networking and file systems to give you compliance without any additional overhead associated with database management or redundant data security systems. Join us to learn about this advancement in our compliance system and all it can do for you.

View Archive

Rheology Workflow Automation with TRIOS AutoPilot: Enhanced Measurement Precision with Less User Training

Bharath Rajaram, Ph.D.

Discover how the new TRIOS AutoPilot software system enables you to standardize rheology workflow processes and decision-making. Combining thorough user-guidance, automated data processing, and decisional logic, AutoPilot reduces measurement variation, expedites tedious operations, and drives actionable decisions.

View Archive

Applications of Tribo-Rheometry in Material Characterization

Yash Adhia

Tribo-rheometry adds one such dimension to a rheometer whereby it can equip the user to perform co-efficient of friction and related measurements to complement traditional rheometry measurements. The present webinar will discuss the applications of tribo-rheometry in materials characterization.

View Archive

Elucidating Thermodynamic Details of Biologic and Small Molecule Drugs using Microcalorimetry

Calliste Reiling, Ph.D.

Isothermal Titration Calorimetry (ITC), Nano Differential Scanning Calorimetry (nanoDSC), and Isothermal Calorimetry (IC) are label-free and immobilization free analytic methods used for critical thermodynamic measurements. The focus of this webinar will be on utilizing these techniques to study molecular binding, biomolecular thermostability, long-term stability and their use in quality control; each an essential step in the development of a successful drug/vaccine candidate.

View Archive

Specific Heat Capacity Measurements Using DSC and Modulated DSC

Yue Schuman, Ph.D.

Specific heat capacity can be conveniently and accurately measured on a differential scanning calorimeter (DSC). There are different ways to determine specific heat capacity of a material on a DSC, which will be covered in this webinar. During this webinar, we will look at how to program an appropriate method to measure specific heat capacity on a DSC with some interesting application examples.

View Archive

Novel 3D Printed Liquid Crystal Elastomers and the Characterization of their Anisotropy, Rate-dependency, and Dissipation Properties

Dr. Chris Yakacki, Ph.D., Devesh Mistry, Ph.D., Nicholas Traugutt

In this webinar, we will briefly introduce LCEs and our 3D printing methods. Next, we will demonstrate our methods and instrumentation that have enabled our fundamental characterization of these exceptional materials. Overall, this webinar covers a range of quasi-static and dynamic mechanical testing methods which we perform using the ElectroForce 3200 instrument to characterize these highly complex and fascinating materials.

View Archive

About The Speakers

Tianhong (Terri) Chen, Ph.D.

Tianhong (Terri) Chen, Ph.D. is a Senior Applications Support Scientist with TA Instruments currently supporting the Rheology and DMA product lines. She received her PhD degree in Polymer Science from Sun Yat-sen University (SYSU) in China, specializing in polymer synthesis and characterization. She did her post-doc research and later became a research assistant professor at the University of Maryland. During that time, her research was focused on biopolymer modifications and analysis. Dr. Chen joined TA Instruments in 2004. Her key responsibilities at TA Instruments are customer support, consultation, and teaching DMA and rheology training courses. Dr. Chen has more than 50 publications in peer-reviewed journals and two US patents.

Malin Suurkuusk, Ph.D.

Malin Suurkuusk is the Isothermal Calorimetry Product Manager / Application Specialist at TA Instruments. She holds a Masters of Science Degree in Biochemistry from Stockholm University, and a PhD from the University of Lund where she studied in the lab of Prof. Ingemar Wadsö. She has worked extensively with Differential Scanning Calorimetry and Isothermal Titration Calorimetry, as well as other biophysical methods. Her early work in microcalorimetry instrument development included responsibilities in product management, applications lab management and marketing at Thermometric in Sweden. She is considered the world’s leading expert on the TAM isothermal instruments with numerous microcalorimetry publications. In October of 2014 she was recognized for her contributions to the field of microcalorimetry, and featured as a Biophysicist in Profile by the Biophysical Society.

Jason Saienga, Ph.D.

Jason Saienga is currently the Product Manager for the Thermal Analysis and Thermal Conductivity product lines at TA Instruments. Jason joined TA in 2006 after completing his doctorate program in Materials Science and Engineering at Iowa State University. Jason started out his career at TA in the applications lab teaching the theory and applications lectures, instrument hands-on courses, and providing customer and sales support for the thermal analysis techniques. As Product Manager, Jason and his team work to define and coordinate of the future of thermal analysis and thermal conductivity product lines at TA.

Justin Wynn

Justin Wynn is an Application Engineer for Thermophysical Properties at TA Instruments. As an Application Engineer, he provides primary support on the thermophysical product line, which includes thermal conductivity meters, flash diffusivity analyzers and dilatometers. He performs demonstrations and conducts feasibility tests to characterize a bevy of samples with appropriate data analysis, and provides application specific test protocol development support. Prior to joining TA Instruments in 2016, he earned his Bachelor’s degree in Biomedical Engineering from the University of Delaware. While there, he assisted in an independent study that involved comparative study of motion in human subjects. His senior capstone project revolved around the development of safety tools to be used in hospital operating rooms.

Yash Adhia

Yash Adhia is a Senior Applications Support Engineer at TA Instruments supporting the thermal and rheology line of products. Prior to joining TA Instruments, he earned his Master’s in Macromolecular Science and Engineering from the University of Michigan, Ann Arbor. During his graduate studies, he worked on studying and characterizing gels formed through the self-assembly of small molecules and its interaction with polymeric additives using thermal, rheological and optical techniques. He earned his Bachelor’s in Surface Coating Technology from the Institute of Chemical Technology, Mumbai, India where his undergraduate research focused on studying curing kinetics of epoxy resins using DSCs. During the course of his undergraduate and graduate studies, he has had the opportunity to intern at Asian Paints India Ltd, Mumbai, working on formulating and characterizing photo-curable coatings, and at INOS Technologies, Ann Arbor working on negative pressure wound therapy foams.

Baiba Cabovska, Ph.D.

Dr. Cabovska holds a research degree in analytical chemistry and has over 10 years of experience in extractables and migration application. Dr. Cabovska is currently a senior business development manager at Waters Corporation, located in Milford, MA – USA where she actively collaborates with customers on providing comprehensive materials characterization solutions across extractables and migration testing applications. Before joining Waters, Dr. Cabovska focused her work on Bioanalytical method development and validations for therapeutic drug monitoring and extractable and leachable studies in packaging.

Muhammad Haris

Muhammad Haris is Application Engineer for TA Instruments ElectroForce based near Frankfurt, Germany. He specialized in ElectroForce mechanical test instruments and engages with customers on their testing needs related to the application of ElectroForce products and puts forward broad-ranging solutions. He holds a master’s degree in Advanced Materials & Processes. Prior to joining TA Instruments, Haris has worked with Procter & Gamble for about 2 years on analytical development and characterization of electric shavers’ blades.

Sadegh Behdad, Ph.D.

Sadegh Behdad is an Applications Engineer at TA Instruments, supporting ElectroForce product line. Sadegh has a PhD in Materials Science and Engineering from Florida International University. He earned his BSc and Masters in Polymer Engineering from Amirkabir University of Technology. Prior to joining TA Instruments, Sadegh worked as a Sr. Materials Scientist at Magic Leap. At Magic Leap, he supported material design and development teams on selection of material candidates and testing various materials and components for wearable virtual retinal display applications.

Greg Kamykowski, Ph.D.

Greg Kamykowski Ph.D. is a Senior Applications Scientist for rheology for TA Instruments US West region. He has a BS in chemistry from Loyola University of Chicago and a PhD in physical chemistry from University of Wisconsin – Madison, where he studied under well-known rheologist, Professor John Ferry. He has published several articles, presented at various conferences and meetings, and is involved with the Society of Plastics Engineers, the Society of Rheology, and ASTM.

Alina Latshaw

Alina Latshaw is the Product Specialist for the Rubber Testing product line at TA Instruments. Alina earned her doctorate degree in Chemical Engineering from North Carolina State University. She joined TA in 2013 as an applications engineer specializing in rheology and dynamic mechanical analysis techniques. As part of the product management team, Alina actively collaborates with customers on providing testing solutions for rubber and elastomer applications ranging from elastomer characterization, compound processing challenges, vulcanization testing, and cured rubber product performance.

Sarah Cotts

Sarah Cotts is an Applications Engineer at TA Instruments in the US Eastern region. She supports the Rheology, DMA and Rubber testing instruments, working directly with customers across a wide range of industries. She earned a B.Sc. in Chemistry from the College of William and Mary. Prior to joining TA, Sarah worked as an Applications Chemist at Sartomer, developing materials for inks, coatings, adhesives and other industrial applications. She joined TA Instruments in 2013 as part of the Applications Lab.

Jeff Lundstrom

Jeff Lundstrom is the Product Manager for Software at TA Instruments. Jeff is a graduate of Colorado State University with a degree in Computer Science. He joined TA in 2005 as a Senior Software Engineer, specializing in Microsoft Windows technologies. He came to TA Instruments directly from Microsoft, where he was a Lead Software Developer for many years. As part of the product management team, Jeff actively collaborates with customers around the world, by providing software solutions for all TA Instruments’ applications. His areas of specialty include 21CFR11, where he was the primary software developer for this technology for TA Instruments, before moving to Product Management.

Bharath Rajaram, Ph.D.

Bharath Rajaram, Ph.D. is a Product Specialist within the rheology group at TA Instruments with responsibility for rotational rheometers and DMAs. Dr. Rajaram earned his M.S. and Ph.D. in Chemical Engineering from the University of California, Irvine. Within the product management team, Dr. Rajaram combines his extensive experience in material characterization with feedback from customers to define and guide new product development.

Calliste Reiling, Ph.D.

Calliste Reiling, Ph.D. is an Application Engineer at TA Instruments, currently supporting the microcalorimetry product line. She received her Ph.D. in Pharmaceutical Sciences from University of Nebraska Medical Center, where she investigated the thermodynamic properties of a variety of DNA and RNA secondary structures, their targeting reactions with partially complementary strands and the importance of water and ions. She also received her master’s from University of Nebraska Medical Center in Biochemistry and Molecular Biology with research centered around the structural biology of regulatory proteins involved in the endocytic pathway and their binding interactions. Calliste joined TA Instruments in 2018. Her key responsibilities at TA Instruments are customer support, consultation, and teaching microcalorimetry training courses.

Yue Schuman, Ph.D.

Yue Schuman, Ph.D. is an Applications Scientist at TA Instruments supporting the thermal analysis product line. Prior to joining TA Instruments, Yue earned a Ph.D. degree in Mechanical Engineering from Villanova University and acquired her Master’s degree in Chemical and Biomolecular Engineering from the University of Pennsylvania. Yue’s research projects focused on thermal, mechanical, and structure-property characterizations of materials ranging from nanoscale to macroscale regimes including nanoparticle silica thin films, graphene, 3D graphene aerogel, paraffin-based phase change materials, and their composite materials. Yue’s core responsibilities at TA Instruments are customer support, method development for sample characterization, and providing training on our instruments.

Chris Yakacki, Ph.D.

Dr. Chris Yakacki received his Ph.D. in mechanical engineering at the University of Colorado Boulder in 2007. During his graduate studies, he helped co-found Medshape, Inc. – a university-based startup focused on developing novel shape-memory devices. Dr. Yakacki worked as the principal scientist at Medshape from 2007-2011, during which time he helped clear the first shape-memory polymer devices through the USFDA. This includes the morphix suture anchor and exoshape anterior cruciate ligament (ACL) fixation device. He returned to academia in 2012 and joined the faculty at the University of Colorado Denver. He received the prestigious NSF Career Award to investigate liquid-crystal elastomers for biomedical applications. He has published over 50 peer-reviewed publications and raised over $2M in federally funded research. He is dedicated to once again translating his research from the university into the marketplace with Impressio – another university-based startup now focused on commercializing liquid-crystal elastomers.

Devesh Mistry, Ph.D.

Dr. Devesh Mistry, my interests lie in the fundamental physics behind the mechanical properties of anisotropic and functionalised polymers. I completed my PhD in 2018 in the School of Physics and Astronomy at the University of Leeds, UK. Supervised by Professor Helen Gleeson, my PhD focused on unresolved inconsistencies in our knowledge of LCE mechanical behaviours. In this process I discovered the inherent negative Poisson’s ratio (auxetic) behaviour of LCEs.

Following my PhD, I joined Prof. Chris Yakacki’s group at the University of Colorado Denver as a postdoctoral fellow – supported by a Lindemann Trust Fellowship. Here my research has focused on using 3D printing to understand the role of order and disorder in the exceptional dissipative properties of LCEs.

To date I have published nine peer-reviewed papers and I hold one patent. From March 2021 I will be commencing a Leverhulme Trust Early Career Fellowship at the University of Leeds, UK.

Nicholas Traugutt

Nicholas Traugutt, I am a Ph.D. candidate in Mechanical Engineering at the University of Colorado Denver under the tutelage of Prof. Chris Yakacki. My research focuses on how to tailor bulk liquid crystal elastomer (LCE) structures across different length scales (e.g. meso, micro, and macro) to better dissipate mechanical energy. In the course of my research, I have discovered several different molding and manufacturing techniques through the use of additive manufacturing as well as helping to improve synthetic methods for the thiol-acrylate LCE chemistry. One of my greatest achievements to date includes creating a scalable and tailorable method to use digital light processing to 3D print LCE structures that would otherwise be difficult to impossible to fabricate.

In my downtime on campus from researching LCEs, I am often tinkering with 3D printers. My knowledge and abilities with 3D printing led to an opportunity to work as a consultant for 3D printing PEEK, and I have success with 3D printing other engineering polymers such as PPSU.

I currently have six peer-reviewed papers, including a recent publication in Advanced Materials for DLP printing LCEs.

Thomas Paschke

Thomas Paschke is the Application Specialist for the Rubotherm Series Thermal Analysis product line at TA Instruments. Thomas joined Rubotherm in 2013 and continued working in this position with TA after Rubotherm as acquired by TA in 2016. After obtaining his PhD in analytical chemistry, Thomas started his career as post-doc at the EERC (Energy & Environmental Research Center) at UND in Grand Forks, ND. Later he worked in different positions for the German company Axel Semrau with GC, GC/MS and high-pressure equipment. As Application Specialist, Thomas supports TA customers in finding the right instruments and methodologies for their challenging TGA applications under extreme conditions.

Gray Slough, Ph.D.

Gray Slough is currently a product specialist in the Thermal Product group at TA Instruments. Dr. Slough received his BS in physics from the University of Texas at Austin in 1983 and his Ph.D. in condensed matter physics from the University of Virginia in 1990. He joined TA Instruments in 1998 as an applications scientist. Within the Thermal Product group he works to help define and develop the thermal analysis product line at TA, and provide technical support to both internal and external customers.