| Technique | Type | Title | Instrument(s) | |
|---|---|---|---|---|
| No result | ||||
| Thermal Analysis - DSC | ASTM - D3418 | Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry | DSC 25 |
|
| Thermal Analysis - DSC | ASTM - D3895 | Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry | ||
| Thermal Analysis - DSC | ASTM - D4419 | Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC) | ||
| Thermal Analysis - DSC | ASTM - D4591 | Standard test method for temperatures and heats of transition of fluoropolymers by Differential Scanning Calorimetry | ||
| Thermal Analysis - DSC | ASTM - D5028 | Standard test method for curing properties of pultrusion resins by thermal analysis | ||
| DSC - pressure | ASTM - D5483 | Standard test method for oxidative induction time of lubricating greases by Pressure DSC | ||
| DSC - pressure | ASTM - D5885 | Standard test method for oxidative induction time of polyolefin geosynthetics by Pressure DSC | ||
| DSC - pressure | ASTM - D6186 | Standard test method for oxidative induction time of lubricating oils by Pressure DSC | ||
| Thermal Analysis - DSC | ASTM - D6580 | Standard test method for determining metallic Zinc content in both Zinc dust pigment and in cured films of Zinc rich coatings by DSC | ||
| Thermal Analysis - DSC | ASTM - D6604 | Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry | ||
| Thermal Analysis - DSC | ASTM - D7138 | Standard Test Method to Determine Melting Temperature of Synthetic Fibers | ||
| Thermal Analysis - DSC | ASTM - D7426 | Standard Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound | ||
| Thermal Analysis - DSC | ASTM - E487 | Standard test method for contant temperature stability of chemical materials | ||
| Thermal Analysis - DSC | ASTM - E537 | Standard test method for assessing the thermal stability of chemical by methods of thermal analysis | ||
| Thermal Analysis - DSC | ASTM - E698 | Standard test method for Arrhenius kinetic constants for thermally unstable materials using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method | ||
| Thermal Analysis - DSC | ASTM - E793 | Standard test method for enthalpies of fusion and crystallization by Diifferential Scanning Calorimetry | ||
| Thermal Analysis - DSC | ASTM - E794 | Standard test method for melting and crystalization temperatures by Thermal Analysis | ||
| Thermal Analysis - DSC | ASTM - E928 | Standard test method for purity by Differential Scanning Calorimetry | ||
| Thermal Analysis - DSC | ASTM - E967 | Standard test method for temperature calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers | ||
| Thermal Analysis - DSC | ASTM - E968 | Standard practice for heat flow calibration of Differential Scanning Calorimeters | ||
| Thermal Analysis - DSC | ASTM - E1231 | Standard practice for calculation of hazard potential figures of merit for thermally unstable materials | ||
| DSC | ASTM - E1269 | Standard test method for determining specific heat capacity by Differential Scanning Calorimetry | ||
| Thermal Analysis - DSC | ASTM - E1356 | Standard test method for assignment of the glass transition temperatures by Differental Scanning Calorimetry | ||
| Thermal Analysis - DSC | ASTM - E1782 | Standard test method for determining vapor pressure by DSC and DTA | ||
| Thermal Analysis - DSC | ASTM - E1858 | Standard test method for oxidative induction time of hyrocarbons by Differential Scanning Calorimetry | ||
| Thermal Analysis - DSC | ASTM - E1860 | Standard test method for time base calibration of thermal analyzers | ||
| Thermal Analysis - DSC | ASTM - E1952 | Standard test method for thermal conductivity and thermal diffusivity by Modulated Temperature Differential Scanning Calorimetry | ||
| Thermal Analysis - DSC | ASTM - E2009 | Standard test method for oxidative onset temperature of hydrocarbons by Differential Scanning Calorimetry | ||
| Thermal Analysis - DSC | ASTM - E2041 | Standard test method for estimating kinetic parameters by Differential Scanning Calorimetry using the Borchardt and Danials method | ||
| Thermal Analysis - DSC | ASTM - E2046 | Standard test method for reaction induction time by Differential Scanning Calorimetry | ||
| Thermal Analysis - DSC | ASTM - E2069 | Standard test method for temperature calibration on cooling of DSC's | ||
| Thermal Analysis - DSC | ASTM - E2070 | Standard test method for kinetic parameters by Differential Scanning Calorimetry using isothermal methods | ||
| Thermal Analysis - DSC | ASTM - E2160 | Standard test method for heats of reaction by Differential Scanning Calorimetry | ||
| Thermal Analysis - DSC | ASTM - E2253 | Standard test method for enthalpy measurement vvalidation of Differential Scanning Calorimeters | ||
| Thermal Analysis - DSC | ASTM - E2602 | Standard Test Methods for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry | ||
| Thermal Analysis - DSC | ASTM - E2716 | Standard test method for determining specific heat capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry | ||
| Thermal Analysis - DSC | ASTM - E2781 | Standard Practice for Evaluation of Methods for Determination of Kinetic Parameters by Thermal Analysis | ||
| Thermal Analysis - DSC | ASTM - E2923 | Standard Practice for Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry | ||
| Thermal Analysis - DSC | ASTM - F2625 |
|
||
| Thermal Analysis - DSC | ISO 11357 | Plastics -- Differential scanning calorimetry (DSC) -- Part 1: General principles | ||
| Thermal Analysis - DSC | ISO 11357 | Plastics -- Differential scanning calorimetry (DSC) -- Part 2: Determination of glass transition temperature and glass transition step height | ||
| Thermal Analysis - DSC | ISO 11357 | Plastics -- Differential scanning calorimetry (DSC) -- Part 3: Determination of temperature and enthalpy of melting and crystallization | ||
| Thermal Analysis - DSC | ISO 11357 | Plastics -- Differential scanning calorimetry (DSC) -- Part 4: Determination of specific heat capacity | ||
| Thermal Analysis - DSC | ISO 11357 | Plastics -- Differential scanning calorimetry (DSC) -- Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion | ||
| Thermal Analysis - DSC | ISO 11357 | Plastics -- Differential scanning calorimetry (DSC) -- Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) | ||
| Thermal Analysis - DSC | ISO 11357 | Plastics -- Differential scanning calorimetry (DSC) -- Part 7: Determination of crystallization kinetics | ||
| TGA | ASTM - D6 | Standard test method for loss on heating of oil and asphaltic compounds | ||
| TGA | ASTM - D1509 | Standard test method for Carbon black - heating loss | ||
| TGA | ASTM - D2216 | Standard test method fof laboratory determination of water (moisture) content of soil and rock | ||
| TGA | ASTM - D2595 | Standard test method for evaporation loss of lubricating greases over wide temperature range | ||
| TGA | ASTM - D2832 | Guide for determining volatile and nonvolatile content of paint and related coatings | ||
| TGA | ASTM - D2866 | Standard Test Method for Total Ash Content of Activated Carbon | ||
| TGA | ASTM - D3172 | Standard practice for proximate analysis of coal and coke | ||
| TGA | ASTM - D3175 | Standard test method for moisture in the analysis sample of coal and coke | ||
| TGA | ASTM - D3850 | Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA) | ||
| TGA | ASTM - D4893 | Standard test method for determination of pitch volatility | ||
| TGA | ASTM - D5805 | Standard Test Methods for Rubber—Determination of Carbon Black in Masterbatches | ||
| TGA | ASTM - D5832 | Standard Test Method for Volatile Matter Content of Activated Carbon Samples | ||
| TGA | ASTM - D6370 | Standard test method of rubber compositional analysis by TGA | ||
| TGA | ASTM - D6375 | Standard test method of evaporation loss of lubricating oils (NOACK) by TGA | ||
| TGA, DMA | ASTM - D6382 | Standard test method of DMA and TGA of roofing and waterproofing membrane materials | ||
| TGA | ASTM - D6559 | Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks | ||
| TGA | ASTM - D6602 | Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both | ||
| TGA | ASTM - D7582 | Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis | ||
| TGA | ASTM - E359 | Standard test method for chemical analysis of Soda Ash (Sodium Carbonate) | ||
| TGA | ASTM - E1131 | Standard test method for compositional analysis by TGA | ||
| TGA | ASTM - E1142 | Terminology relating to thermophysical properties | ||
| TGA | ASTM - E1582 | Standard practice for calibration of temperature scale for TGA | ||
| TGA | ASTM - E1641 | Standard test method for decomposition kinetics by TGA | ||
| TGA | ASTM - E1868 | Standard test method for loss on drying by thermogravimetry | ||
| TGA | ASTM - E1877 | Standard test method for thermal endurance of materials from TGA decomposition | ||
| TGA, DSC | ASTM - E1953 | Descriptionn of thermal analysis apparatus | ||
| TGA, DSC | ASTM - E1970 | Statistical treatment of thermal analysis data | ||
| TGA | ASTM - E2008 | Standard Test Methods for Volatility Rate by Thermogravimetry | ||
| TGA | ASTM - E2040 | Standard test method for mass scale calibration of TGA's | ||
| TGA, FTIR | ASTM - E2105 | Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR) | ||
| TGA | ASTM - E2402 | Standard test method for mass loss and residue measurement validation of TGA's | ||
| TGA | ASTM - E2403 | Standard test method of sulfated ash of organic materials by TGA | ||
| TGA | ASTM - E2550 | Standard Test Method for Thermal Stability by Thermogravimetry | ||
| TGA | ASTM - E2551 | Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers | ||
| TGA | ISO 11358 | Plastics -- Thermogravimetry (TG) of polymers -- Part 1: General principles | ||
| TGA | ISO 11358 | Plastics -- Thermogravimetry (TG) of polymers -- Part 2: Determination of activation energy | ||
| TGA | ISO 11358 | Plastics -- Thermogravimetry (TG) of polymers -- Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics | ||
| TGA | ISO 12988 | Carbonaceous materials used in the production of aluminium -- Baked anodes -- Determination of the reactivity to carbon dioxide -- Part 2: Thermogravimetric method | ||
| TGA | ISO 12989 | Carbonaceous materials used in the production of aluminium -- Baked anodes and sidewall blocks -- Determination of the reactivity to air -- Part 2: Thermogravimetric method | ||
| TMA/DIL | ASTM - D696 | Standard test method for coefficient of linear thermal expansion of plastics between -30 and 30°C with a vitreous silica dilatometer | ||
| DIL | ASTM - D4535 | Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer | ||
| DIL | ASTM - D5515 | Standard Test Method for Determination of the Swelling Properties of Bituminous Coal Using a Dilatometer | ||
| DIL | ASTM - E228 | Standard test method for coefficient of linear thermal expansion of solid materials with a push rod dilatometer | ||
| TMA/DIL | ASTM - E473 | Terminology relating to thermal analysis and rheology | ||
| TMA/DIL | ASTM - E831 | Standard test method for linear thermal expansion of solid materials by Thermomechanical Analysis | ||
| TMA/DIL | ASTM - E1142 | Terminology relating to thermophysical properties | ||
| TMA/DIL | ASTM - E1363 | Standard test method for temperature calibration of Thermomechanical Analyzers | ||
| TMA/DIL | ASTM - E1545 | Standard test method for assignment of the glass transition temperature by TMA | ||
| TMA/DIL | ASTM - E1842 | Standard test method for assignment of the glass transition temperature by TMA in tension | ||
| TMA/DIL | ASTM - E2092 | Standard test method for distortion temperature in 3-point bending by TMA | ||
| TMA/DIL | ASTM - E2113 | Standard test method for length change calibrations of Thermomechanical Analyzers | ||
| TMA/DIL | ASTM - E2347 | Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis | ||
| TMA/DIL | ASTM - E2769 | Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading | ||
| TMA/DIL | ASTM - E2918 | Standard Test Method for Performance Validation of Thermomechanical Analyzers | ||
| TMA | ISO 11359 | Plastics -- Thermomechanical analysis (TMA) -- Part 1: General principles | ||
| TMA | ISO 11359 | Plastics -- Thermomechanical analysis (TMA) -- Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature | ||
| TMA | ISO 11359 | Plastics -- Thermomechanical analysis (TMA) -- Part 3: Determination of penetration temperature | ||
| DMA | ASTM - D618 | Standard Practice for Conditioning Plastics for Testing | ||
| DMA | ASTM - D4000 | Standard Classification System for Specifying Plastic Materials | ||
| DMA | ASTM - D4066 | Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures | ||
| DMA, Rheology | ASTM - D4092 | Standard Terminology for Plastics: Dynamic Mechanical Properties | ||
| DMA | ASTM - D5023 | Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending) | ||
| DMA | ASTM - D5024 | Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression | ||
| DMA | ASTM - D5026 | Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension | ||
| DMA, Rheology | ASTM - D5279 | Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion | ||
| DMA | ASTM - D5418 | Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam) | ||
| DMA | ASTM - D7028 | Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA) | ||
| DMA, Rheology, Thermal | ASTM - E473 | Standard Terminology Relating to Thermal Analysis and Rheology | ||
| DMA | ASTM - E1640 | Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis | ||
| DMA | ASTM - E1867 | Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers | ||
| DMA | ASTM - E2254 | Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers | ||
| DMA | ASTM - E2425 | Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers | ||