Software Downloads & Support

TA Instruments strives to deliver high quality software products. These products are continuously updated to add features, support new instruments, and repair software issues. In addition, your input regarding our software products is important to us.

軟體下載連結

Trios Software Download

Introducing the latest TRIOS Software! This download is a full version of TRIOS.

TRIOS Software v4.2.1 contains the necessary files to update your TRIOS software from any previous version.

Download TRIOS v4.2.1

  • Details
  • Instructions
  • Support Documentation

Details

Supported Operating Systems: 32 & 64-bit versions of Windows 7, 8, & 10 Ultimate, Enterprise & Professional.

  • File Name: Trios_v4.2.1.36612.exe
  • Version: 4.2.1
  • File Format: Self Extracting Setup Executable
  • Download Size: 1000 MB
  • Estimated Download Time: ~5 Minutes
  • Date Published: July 7, 2017

Download Instructions

  1. Click the Download button on right to start the download of TRIOS v4.2.1
  2. Select Save to download the file to your computer for installation.
  3. Refer to the Installation Guide (located in the Support Documentation section) for detailed installation instructions.

Important Notes

Nano Series Software Download

ITCRun v3.3.9 NanoAnalyze v3.7.5 DSCRun v4.4.9 MC-DSCRun v3.3

  • Nano Series Software Versions
  • Cleaning Station Methods Software
  • Instructions

Instructions

These downloads are a full version of the software and documentation.

Supported Operating Systems: 32 & 64-bit versions of Windows 7 Ultimate, Enterprise & Professional and Windows 8.1

Download format: A self-extracting executable archive format is provided. Download and the self-extracting file to install your latest NanoSeries Software.

TAM Assistant Series Software

Introducing the latest TAM Series Software.

Download

  • Software Details
  • Instructions

Software Details

TAM Assistant Software V2.0.65

Release Notes

Note: This software supports TAM III, TAM IV, and TAM Air instruments in a single installer.

This download is a full version of the software and documentation.

Instructions 

Supported Operating Systems: 32 & 64bit versions of Windows 7/10 Ultimate and Professional. If using Windows 10, .NET 3.5 must be enabled in order for TAM Assistant to work properly.

File Name: ‘TAMAssistantInstaller v2.0.65.exe’ Version: 2.0.65 File Format: Self Extracting Setup Executable Download Size: 141mb Date Published: 7/19/2017

Instructions:

  1. Click the TAM Software link on this page to start the download.
  2. Choose one of the following options:
    • Select Run to start the installation immediately.
    • Select Save to download the file to your computer for installation at a later time.

 

Advantage/Universal Analysis (UA) Software

Introducing the latest Advantage Software.

Download

  • Details
  • Instructions

Details

Installation Guide

Thermal Q Series Installation Requirements

Thermal Release Notes

Rheology Release Notes

This download is a full version of Advantage. This package also contains the Universal Analysis software

Click here for information on how to install Universal Analysis only

Advantage Software v5.5.22. This download contains the necessary files to update your Advantage software from any previous version to v5.5.22.

 

Instructions

Supported Operating Systems: 32 & 64-bit versions of Windows XP Professional, Vista Business and Ultimate, and Windows 7 Ultimate & Professional and Windows 10. File Name: Advantage_v5.5.22.exe Version: 5.5.22 File Format: Self Extracting Setup Executable Download Size: 694 mb Estimated Download Time: 20 min (T1) Date Published: 7/24/2015

Instructions:

  1. Click the Advantage Software v5.5.22 link on this page to start the download.
  2. Choose one of the following options:
    • Select Run to start the installation immediately.
    • Select Save to download the file to your computer for installation at a later time.

 

SA+ Software

Introducing the latest SA+ Software.

Download

  • Details
  • Instructions

Details

SA + Software v18_201210112

Installation Guide

Release Notes

This download is a full version of SA+.

SA+ Software v18_201210112

 

Instructions

Supported Operating Systems: 32 & 64-bit versions of Windows XP Professional, Vista Business and Ultimate, and Windows 7 Ultimate, Enterprise & Professional File Name: SA+_v18_201210112.exe Version: 18_201210112 File Format: Self Extracting Setup Executable Download Size: 1.4GB Estimated Download Time: 30 min (T1) Date Published: 10/12/2012 Instructions:

  1. Click the SA + Software v18_201210112 link on this page to start the download.
  2. Choose one of the following options:
    • Select Run to start the installation immediately.
    • Select Save to download the file to your computer for installation at a later time.

 

WinTest Software

WinTest® is a high-performance software package that is used to operate all TA ElectroForce mechanical test instruments.  It encompasses both a flexible user interface and a powerful instrument controller.”

Single user interface with all necessary inputs/outputs to configure test protocols, define acquisition settings, adjust test parameters while a test is running, and real-time monitoring of test progress.

Maximum Flexibility

  • A range of standard test definition waveforms including sine, triangle, square, ramps
  • Create customized combinations of waveforms for multiple segment tests and utilize other features including conditional branching, relative move, and embedded data acquisition, with block waveform programming. Collect the appropriate amount of data for your test by selecting one of four data acquisition modes Configurable and reliable for tests ranging in duration from 10 milliseconds to 10 months
  • Expandable with software options that extend the power of WinTest for specific applications, including a DLL interface to communicate with user-written software such as LabView or MATLAB.

State of the art control algorithms

  • High-speed closed-loop controller capable of harnessing even the most dynamic ElectroForce motors
  • TuneIQ® auto-tuning process for simple controller setup
  • Adaptive amplitude and phase controllers for high-precision control over long-term tests
  • Controller stability checks provide peace of mind
  • Capable of real-time control using a variety of sensors to perform a wide range of tests.

Advanced Security Suite mode that assists laboratories in satisfying 21CFR11 requirements. Monitor test progress with up to 4 configurable real-time data, high-speed scopes

WinTest software is supported by a full range of services including onsite training, free online training sessions, and customer service that is only a phone call away.  All of these items reflect TA Instruments’ commitment to provide instruments and related services that deliver maximum value for your investment.

What’s New in WinTest 8.0 Release Notes Contact Us

DMA Software

ElectroForce Dynamic Mechanical Anaylsis (DMA) software provides a flexible platform for advanced viscoelastic property measurement for a variety of materials, including engineered materials, such as elastomers, composites as well as biomaterials. WinTest DMA software provides improved test control and analysis, including online test status graphics and better test metrics, enhancing the capabilities of ElectroForce test instruments for dynamic mechanical analysis applications.

Key Features

  • Test set-up configuration tool
  • Advanced viscoelastic property measurement
  • Real-time test updates
  • TRIOS plotting and analysis

Electroforce Testing Solutions for DMA What’s New in WinTest 8.0 Release Notes

Scarabaeus Software
infographic

Instrument Control and Data Analysis

The Scarabaeus Software for instrument control and data analysis is a powerful and versatile system for programming experiments, providing quick feedback of results, and managing data from all rubber testing instruments. The Scarabaeus Software was developed with customers from the rubber industry and is designed to meet the specific need of production and research.

Designed For Integration

The Scarabaeus Software system for instrument control and analysis integrates and organizes data from multiple instruments and historical tests. Data from RPA, MDR, Mooney Viscometer, Hardness, and Density tests can be organized, compared, and analyzed by material type, inventory order, date, and more. Advanced integration with even greater capability is also available.

Read more >>

Orchestrator Software

Introducing the latest Orchestrator Software.

Download

  • Versions
  • Instructions

Versions

Orchestrator Software v7.2.0.4

Orchestrator Release Notes

This download is a full version of Orchestrator, but you must have a valid software security key to run it. If you are a registered Orchestrator user and already have a software security key from a previous Orchestrator version, this key will continue to function with this new version. If you do not have an Orchestrator security key please call your TA Instruments Technical Sales Representative for assistance.

Instructions

This download contains the necessary files to update your Orchestrator software from any previous version to v7.2.0.4.

Supported Operating Systems: 32 & 64-bit versions of Windows XP Professional, Vista Business and Ultimate, and Windows 7 Ultimate & Professional File Name: Orchestrator_v7.2.0.4.exe Version: 7.2.0.4 File Format: Self Extracting Setup Executable Download Size: 45mb Estimated Download Time: 1 min (T1) Date Published: 3/4/2008 Instructions:

  1. Click the Orchestartor Software v7.2.0.4 link on this page to start the download.
  2. Choose one of the following options:
    • Select Run to start the installation immediately.
    • Select Save to download the file to your computer for installation at a later time.